miopx.blogg.se - Conexant fusion 878a tv fm pci capture card drivers

Leadtek Winfast 2000 XP (PAL, UK and NTSC) The following cards are said not to work, but it's not known if they are wired the wrong way, not properly initialized, or just mistakenly thought not to work: For example, the box labeled model 753 may contain one of these:īoard #44804 rev #D183, auto card=10 tuner TCL2002MB-3 (hidden sticker),īut has to be forced to tuner=41 (Phillips PAL-MK(FI1216MK)īoard #44804 rev #D108, auto card=10 tuner FI1216MK15 (hidden sticker), Note: Hauppauge model labels are often uninformative. Hauppauge WinTV Express, models 751, 753 (but see note) Hauppauge WinTV-Theater, model 495, 498 (Europe) Hauppauge WinTV-radio with dbx-TV stereo, model 401 These cards are known to work with btaudio the real set of working cards is much larger: While a digital signal processor such as the MSP34xx is required for btaudio's digital mode, any bt87x card has the required hardware to work with btaudio's analog mode. In other cases, (see Initialization failures below or AVerMedia TVCapture_98), the card is wired correctly, but not adequately initialized, so that the btaudio driver fails.Īccording to the MythTV HowTo, you need a bttv tuner device with an MSP34xx chip. In some cases, the manufacturer elected not to connect the TV tuner analogue audio out to one of the two ADC analogue inputs, which means you'll get no sound from btaudio.

Note that saa713x cards unproblematically let you get the audio directlyĪlthough all cards with BT87x chips are capable of supporting btaudio, not all cards do.

Failed attempt at getting the sound directly off a AVerMedia TVCapture 98.

MythTV wiki: setting up btaudio on an ATI TV Wonder card.

Gerd Knorr's instructions (copied from the 2.6.12-rc2 kernel and lightly updated).

Found here (You need to translate it if you don't speak portugues This has been reported to be true for all versions of Pico2000, however, it is verified for version 1.9 that loading of the device drivers are not necessary - Taken from Note: This driver can only be used in a 64bit system with less than 4gigs of ramĪfter searching around i have found that my card "Pico UCC4 Conexant 878A 4-port PCI DVR Card" The software works with the UCC4 cards even if device drivers are not loaded for the cards in Windows. Note: This driver can be used with Windows XP, Windows Vista or Windows 7.